1/MPB30277+B

Microduct Assembly 14/10 mm

TWD 14/10 mm 2-7 way TIA598

For direct burial
2, 4 or 7 bundled ducts
14/10 mm microducts
Low friction inner surface
Longitudinal grooves for maximum installation lengths

The thick walled microduct are designed with an inner low friction surface that enables installation of micro cables or nano cables. The thick wall of the microducts allow for installation directly into the ground without the need for additional protection.

The duct assemblies are available in several configurations from 2 to 7 microducts.

14/10 mm microducts are optimized for installation of micro cables and nano cables. The microducts have a low-friction innner surface with longitudinal grooves for best blowing performance.

Microducts and outer sheath: HDPE

Technical Information

Color Code	TIA598
Temperature, Operation [°C]	-40 to +60
Temperature, Storage [°C]	-40 to +60
Temperature, Installation [°C]	-20 to +50
Conformance	Abrasion: IEC 60794-1-2-E2B(1) Kink: IEC 60794-1-2-E10, 20 x outer diameter Impact: IEC 60794-1-2-E4 Crush: IEC 60794-1-2-E3 Tensile: IEC 60794-1-2-E Bend: IEC 60794-1-2-E11A Torsion: IEC 60794-1-2-E Flexibility: IEC 60794-1-2-E8 Inner Clearance: IEC 60794-5-20, IEC 60794-5-10, Ann. D
Marking	Duct assemblies have markings showing the tube length. The individual microducts are identified by their colours according to the TIA standard. The assemblies come with a green outer sheath, or with a customised outer sheath colour by special order.