- Products
- Microducts and Microduct Assemblies
- Direct Buried Thick Walled Ducts
- Microduct Assembly 8/4.4 mm with Tracer
MPB30268+BA
Microduct Assembly 8/4.4 mm with Tracer
TWD 8/4.4 mm, Tr, S12
- For direct burial
- 8/4.4 mm microducts
- Low friction inner surface
- Integrated tracer wire under sheath
The thick walled microduct bundles consist of a number of microducts with an inner low friction surface that enables installation of air-blown fiber units or nano cables. The thick inner wall of the microducts allow for installation directly into the ground without the need for additional protection.
The integrated tracer wire saves time and installation cost since an additional wire for tracing is not required.
The duct assemblies are available in configurations with a single duct and an outer sheath.
8/4.4 mm microducts are optimized for installation of air-blown fibers and nano cables. The microducts have a solid low-friction innner surface for best blowing performance.
Microducts and outer sheath: HDPE
Tracer Wire
Single ducts: 24 AWG (0.2 mm²)
Material: Isolated, stranded copper
Technical Information
Color Code | S12 |
---|---|
Temperature, Operation [°C] | -40 to +60 |
Temperature, Storage [°C] | -40 to +60 |
Temperature, Installation [°C] | -20 to +50 |
Conformance |
Abrasion: IEC 60794-1-2-E2B(1)
|
Marking | Duct assemblies have markings showing the type and tube length. |