The product assortment on this website may differ from what is available where you are located. Do you want to visit the American website instead?

RDJ901200+

Fiber Optic Splitter Modules

PLC 2 to 64 Ports Single/Dual Input

  • 1x2 to1x64 standard split ratios
  • 2x2 to 2x64 for redundancy and test access
  • Wideband performance
  • Low insertion loss
  • Low back reflection
  • High output uniformity
  • Stable optical performance
  • Bend resistant fiber G.657A2 compliant
  • SC/APC, LC/APC, SC or LC connectors
  • 1x2 to1x64 standard split ratios
  • 2x2 to 2x64 for redundancy and test access
  • Wideband performance
  • Low insertion loss
  • Low back reflection
  • High output uniformity
  • Stable optical performance
  • Bend resistant fiber G.657A2 compliant
  • SC/APC, LC/APC, SC or LC connectors

The Planar Lightwave Circuit (PLC) splitter modules are designed to fit the Hexatronic Fiber Distribution Hubs (FDH) 1/NBD 116 200 and 2/NBD 116 200. It can also be used with 19” splitter frames NBA 30104, 05 in Central Ofice applications (centralized splitters). The module provides uniform division of an optical signal from one or two input fiber ports multiple output ports. The splitters are designed to meet the requirements for a wide range of fiber optic communications systems like in PON FTTx networks.

Low loss under extreme environmental conditions ensures stable operation. The compact packages equipped with bendresistant pre-connected fiber makes them especially suitable for fast and incremental installation in compact FDH cabinets.

1 x n and 2 x n PLC splitters utilize silica on silica optical waveguide technology. PLC splitters enable thermally stable,

compact packages with wideband performance.

The splitters are available in configurations with single fiber input from 1x2 to 1x64 as well as with dual fiber inputs 2x2 to 2x32. The pre connected cables has an outer diameter of 1.6 mm.

Two types are available:

  1. Short tail, 180 mm (input) / n x730 mm (output) pre-terminated ends
  2. Long tail, 900 mm (input) / n x1500 mm (output) pre-terminated ends

The Splitter module housing is made of Poly Carbonate (PC).

All materials are RoHS approved.

Dimensions (DxWxH): 80 x 10 x 125 mm. (splitters =< n x 32)
Dimensions (DxWxH): 80 x 20 x 125 mm. (splitters = n x 64)

Technical Information

Product Color Light grey
Temperature, Operation [°C] -40 to +85
Temperature, Storage [°C] -40 to +85
Temperature, Installation [°C] -20 to +50
Fiber Type G657A1
Return Loss, min [dB] 55
Conformance Telcordia GR-1209, GR-1221
IEC 67153-031-3/-6.
IEC 61754-4
IEC 61754-6
IEC 61754-20
ITU-T G.657 A
ITU-T G.671 (1:16 and 1:32 splitters)
RoHS
Technical Notes

Operating Wavelength: 1260 ~ 1360, 1450 ~ 1650 nm
Maximum input power: 500mW

Installation Notes Note that the splitters are available in two main configurations with long tail or short tail and with single fiber input or dual fiber input. Choose the right type for your application or ask Hexatronic for advice.