MPB30328

Universal Drop Duct FRP (PIA Approved)

Suitable for aerial applications along power lines as well as direct burial or direct install

Aerial, dielectric, self-supporting design
Low friction inner surface
Excellent UV resistance
Controlled tensile breaking force for maximum security, less than 2000N

Aerial, dielectric, self-supporting design
Low friction inner surface
Excellent UV resistance
Controlled tensile breaking force for maximum security, less than 2000N

The ducts are dielectric and self-supported. This makes the ducts suitable for aerial applications along power lines as well as direct burial or direct install.

Microducts: HDPE
Strain relief: FRP

Technical Information

Product Color	Black
Temperature, Operation [°C]	-20 to +60
Temperature, Storage [°C]	-30 to +70
Temperature, Installation [°C]	-15 to +50
Fiber Type	G657A1;G657A2
Conformance	Abrasion: IEC 60794-1-21-E2B(1) Kink: IEC 60794-1-21-E10, Impact: IEC 60794-1-21-E4 Crush: IEC 60794-1-21-E3 Bend: IEC 60794-1-21-E11A Torsion: IEC 60794-1-21-E7 Inner Clearance: IEC 60794-1-21-E123, IEC 60794-5-10, Ann. D
Marking	Marking: Example of sheath marking, 1 time/meter: “= xxxxx M = HEXATRONIC – MPB30315+ yy.mm.dd" where yy.mm.dd = year, month and day of manufacture, xxxxx=running meter marking.
Installation Notes	The cable shall only be installed using approved suspension clamps. Recommended maximum span length for PIA applications is 50m, Deployment wind loads and 10mm ice coverage should be taken into consideration and will reduce recommended installation length.