FOTT-AIR-X-1SHOT-08-50

1Shot – Duct Integrity Tester

Original, Market Leading Hexatronic Duct Testing Kit

Suitable for 8mm duct
Single Operator Testing
Calibration & Pressure Test Combined
No Remote End Cap Replacement
Can be PERMANENT
Pack of 50

How it works

The receivers are applied to the subscriber end of the Microduct (Toby Box). Simple Push-fit Process the same as a standard Coupler.

These vented Receivers are free to air to allow for Compressed air to be applied.

Darts are blown in from the origin (Street Cabinet) their uninterrupted deployment proves a continual 2.6mm ID through the duct. NO significant Crushes or kinks.

Once received, the Dart plugs the end of the catcher, this creates an air block and pressure will increase. This pressure should be maintained for 2mins.

If no drop is seen all couplers are well seated and not leaking. Any drops in pressure indicate a faulty duct or faulty connector.

Suitable for 8mm duct

The ‘One Shot’ Duct testing Kit offers 50x 1Shot Receivers that make it possible to test a 48 Fibre Distribution cabinet from a single location with a single operator.