A variety of microduct assemblies with TIA colours for installation into existing conduits.

MPB30323+B

Microduct Assembly 5/3.5 mm

TPD 5/3.5 mm 4-19 way TIA598 Termite Protected

For installation in existing ducts
4, 7, 12 or 19 over-sheathed ducts
5/3.5 mm microducts
Low friction inner surface for maximum installation lengths
Excellent environmental properties
Termite protected nylon coated microducts

For installation in existing ducts
4, 7, 12 or 19 over-sheathed ducts
5/3.5 mm microducts
Low friction inner surface for maximum installation lengths
Excellent environmental properties
Termite protected nylon coated microducts

The tight protected duct assemblies consist of a number of microducts with an inner low friction, antistatic surface that enables installation of air blown fibers. The duct assemblies are bundled with a single HDPE or PP sheath depending on configuration. The design makes the duct assemblies especially suitable for installation into narrow existing ducts, conduit or pipes occupied with cables or other obstacles. The round structure enables easy splicing and sealing at joints and branch locations. The nylon layer applied to each microduct makes these assemblies suited to termite prone areas even where the outer jacket is removed for branching or routing.

The duct assemblies are available in several versions with 4 to 19 microducts. Each microduct has an outer and inner diameter of 5/3.5 mm. These microducts are suitable for installation of air blown fiber units or nano cables.

Microduct Assembly 5/3.5 mm - Technical Details

Microducts: HDPE and Nylon
Outer Sheath: HDPE or PP

Technical Information

Product Color	Black
Color Code	TIA598
Temperature, Operation [°C]	-40 to +60
Temperature, Storage [°C]	-40 to +60
Temperature, Installation [°C]	-20 to +50
Conformance	Abrasion: IEC 60794-1-2-E2B(1) Kink: IEC 60794-1-2-E10, 20 x outer diameter Impact: IEC 60794-1-2-E4 Crush: IEC 60794-1-2-E3 Tensile: IEC 60794-1-2-E Bend: IEC 60794-1-2-E11A Torsion: IEC 60794-1-2-E Flexibility: IEC 60794-1-2-E8 Inner Clearance: IEC 60794-5-20, IEC 60794-5-10, Ann. D
Marking	Duct assemblies have markings showing the tube length. The individual microducts are indentified by their colours according to the TIA standard. Bundles of more than 12 ducts are also identified by numbers 1 and 2. The assemblies come with a black outer sheath, or with a customised outer sheath colour by special order.