MPB30327+B

Microduct Assembly 12/10 mm

TPD 12/10 mm 4-7 way TIA598 Termite Protected

For installation in existing ducts
4 or 7 over-sheathed ducts
12/10 mm microducts
Low friction inner surface for maximum installation lengths
Longitudinal grooves for maximum installation lengths.
Termite protected nylon coated microducts

For installation in existing ducts
4 or 7 over-sheathed ducts
12/10 mm microducts
Low friction inner surface for maximum installation lengths
Longitudinal grooves for maximum installation lengths.
Termite protected nylon coated microducts

The tight protected duct assemblies consist of a number of microducts with an inner low friction surface that enables installation of micro cables or nano cables. The duct assemblies are bundled with a single HDPE or PP sheath. The design makes the duct assemblies especially suitable for installation into narrow existing ducts, conduits or pipes occupied with cables or other obstacles. The round structure enables easy splicing and sealing at joints and branch locations. The nylon layer applied to each microduct makes these assemblies suited to termite prone areas even where the outer jacket is removed for branching or routing. The microducts are optimized for best performance in combination with the Hexatronic Viper Micro Cable and Hexatronic Raptor Nano Cables.

The duct assemblies are available in several versions with 4 or 7 microducts.

12/10 mm microducts are optimized for installation of micro cables and nano cables. The microducts have a low-friction innner surface with longitudinal grooves for best blowing performance.

Microduct Assembly 12/10 mm - Technical Details

Microducts: HDPE and Nylon
Outer Sheath: HDPE or PP

Technical Information

Product Color	Black
Color Code	TIA598
Temperature, Operation [°C]	-40 to +60
Temperature, Storage [°C]	-40 to +60
Temperature, Installation [°C]	-20 to +50
Conformance	Abrasion: IEC 60794-1-2-E2B(1) Kink: IEC 60794-1-2-E10, 20 x outer diameter Impact: IEC 60794-1-2-E4 Crush: IEC 60794-1-2-E3 Tensile: IEC 60794-1-2-E Bend: IEC 60794-1-2-E11A Torsion: IEC 60794-1-2-E Flexibility: IEC 60794-1-2-E8 Inner Clearance: IEC 60794-5-20, IEC 60794-5-10, Ann. D
Marking	Duct assemblies have markings showing the tube length. The individual microducts are indentified by their colours according to the TIA standard. The assemblies come with a black outer sheath, or with a customised outer sheath colour by special order.