The product assortment on this website may differ from what is available where you are located. Do you want to visit the American website instead?

EX-MAX-715+

EXFO MaxTester 715 last-mile OTDR

MaxTester 715 is useful for Point-To-Point links, last mile installation and troubleshooting.

  • Rugged, handy, lightweight, tablet-inspired design built for

outside plant

  • 7-inch, outdoor-enhanced touchscreen–the biggest in the handheld industry
  • 12-hour autonomy
  • Dead zones: event dead zone (EDZ) 0.9 m, attenuation dead zone (ADZ) 3.6 m
  • Dynamic range up to 32 dB
  • Swap-Out connector, replaceable whenever necessary for optimal performance over time without undue service cost and downtime
  • iOLM-ready: one-touch multiple acquisitions, with clear go/no-go results presented in a straightforward visual format
  • 3-year warranty
  • Rugged, handy, lightweight, tablet-inspired design built for

outside plant

  • 7-inch, outdoor-enhanced touchscreen–the biggest in the handheld industry
  • 12-hour autonomy
  • Dead zones: event dead zone (EDZ) 0.9 m, attenuation dead zone (ADZ) 3.6 m
  • Dynamic range up to 32 dB
  • Swap-Out connector, replaceable whenever necessary for optimal performance over time without undue service cost and downtime
  • iOLM-ready: one-touch multiple acquisitions, with clear go/no-go results presented in a straightforward visual format
  • 3-year warranty
Talk to an expert

  • FTTx last-mile installation and troubleshooting
  • Short access-network testing
  • FTTA fiber-DAS installations
  • CATV/HFC network testing

As an OTDR, MaxTester can be excellent both for fiber to the home (FTTH), or projects with longer fiber distances where a higher dynamics second. Can also be configured to handle measurements on trafficked fiber, with a filtered 1625 nm port. Available as a pure multimode OTDR or combination unit with both single and multimode. In combination with iOLM, MaxTester and extremely competent OTDR will lift all your measurements to expert level.

EXFO MaxTester 715 last-mile OTDR - Technical Details

The MaxTester 700D OTDR Series comes with a Swap-Out connector which can easily be changed, as and when needed, without having to send the test unit to a service center. This ensures optimal performance over time without undue maintenance costs and downtime. The OTDR's optical connector health can be checked with an onboard diagnostic tool to replace the connector only when necessary.

Technical Information

Temperature, Operation [°C] -10 °C / +50 °C
Temperature, Storage [°C] -40 °C / +70 °C
Temperature, Installation [°C] -40 °C / +70 °C
Fiber Type G657A1;G652D;G657A2;G657B2;G657B3;G654A;G654B;G654C;G654D;G654E;G655C;G655D;G655E;G656
Conformance LASER SAFETY (Complies with FDA 1040.10 and IEC 60825-1:2014)
Technical Notes 3-year warranty