- Products
- Installation and Test
- Air Blown Installation Tools
- V0 Series Fiber Blowing Machines
JET-V0-HD
V0 Series Fiber Blowing Machines
Fiber blowing machine for cable 0.8 - 6.5mm and ducts from 3 - 16mm
- Battery operated. Optional AC power supply.
- Allows installation in a larger duct with a smaller compressor.
- Electronic stopping/slipping protection within 250 ms.
- Gentle operation, reduced cable pull with the aid of continuously variable pushing force.
- Forward and reverse function
- Display for current speed, distance, pushing force pressure and duct air temp.
- Max. speed: 250 m/min.
- Stepless pushing force on cable up to: 200 N.
- Adjustable clamping force.
- Works with JetLogger.
- Displays various key parameters
- Battery operated. Optional AC power supply.
- Allows installation in a larger duct with a smaller compressor.
- Electronic stopping/slipping protection within 250 ms.
- Gentle operation, reduced cable pull with the aid of continuously variable pushing force.
- Forward and reverse function
- Display for current speed, distance, pushing force pressure and duct air temp.
- Max. speed: 250 m/min.
- Stepless pushing force on cable up to: 200 N.
- Adjustable clamping force.
- Works with JetLogger.
- Displays various key parameters
This blowing tool is used for the installation of fiber units, Nanocables and Microcables into Microducts. This tool allows for efficient installation of Hexatronic Stingray™ and Raptor™ cables in the Hexatronic microduct system.
Extremely compact electrically operated fiber blowing machine optimized for FTTX installation of blown fiber (ABFU) and micro/nano cables, from 0,8 to 6.5 mm into duct from 3 to 16 mm. A full digital control system with soft- start, electronic fiber security, memory functions, combined with high speed possibility makes the machine very easy and effective to use. Can be operated directly from its case.
The kit consists of the following standard items:
- V0 blowing machine
- Transport case
- Rubber drive wheel for 0.8 - 3.0 mm
- Metal drive wheel for 3.0 - 4.5 mm
- Metal drive wheel for 4.5 - 6.5 mm
- Battery charger
- 2 batteries
- 1 bottle Microduct Lube
- Service kit
The kit can also be configured with the following accessories:
- Cable inlet guides
- External power supply
- Tripod/table bracket
- Jetlogger
- Metal drive wheel for <2.5mm cable
- Cable guides for V0 case
- Cable seals
- Air hose 10m 320 series CEJN
Technical Information
Technical Notes |
Battery: 18V, 5Ah Hikoki/Hitachi
|
---|---|
Ordering Information | Additional duct clamp and seal sizes available. Contact Hexatronic for more information. |