- Products
- Microducts and Microduct Assemblies
- Direct Buried Thick Walled Ducts
- Microduct Assembly 7/3.5 mm
MPB30278+T
Microduct Assembly 7/3.5 mm
TWD 7/3.5 mm 1-24 -way FIN2012
- For direct burial
- 7/3.5 mm microducts
- Low friction inner surface
The thick walled microduct are designed with an inner low friction surface that enables installation of air-blown fiber units or nano cables. The thick inner wall of the microducts allow for installation directly into the ground without the need for additional protection.
7/3.5 mm microducts are optimized for installation of air-blown fibers and nano cables. The microducts have a solid low-friction innner surface for best performance.
Technical Information
Värijärjestys | FIN2012 |
---|---|
Lämpötila, käyttö [°C] | -40 to +60 |
Lämpötila, varastointi [°C] | -40 to +60 |
Lämpötila, asennus [°C] | -20 to +50 |
Vaatimustenmukaisuus |
Abrasion: IEC 60794-1-2-E2B(1)
|
Merkintä | Microducts have markings showing the type and tube length. The individual microducts are identified by their colors. 12 different colors are used according to the FIN2012 standard. For duct assemblies with >12 ducts, the first 12 colored ducts are marked with “1” and the following ducts are marked with “2”. The assemblies are available in various sheath colors for easy identification. |