- Products
- Splitters and Other Passive Devices
- Spliced Splitters
- Broadband Fiber Optic Splitters
RDB10416+
Broadband Fiber Optic Splitters
2 to 64 Ports Single/Dual Input PLC Splitters
- 1x2, to 1x64 standard configurations
- 2x2 to 2x32 for test access and redundancy
- Wideband performance
- Low insertion loss
- Low back reflection
- Low PDL (Polarization Dependent Loss)
- Low WDL (Wavelength Dependent Loss)
- Low TDL (Temperature Dependent Loss)
- High output uniformity and Stable optical performance
- According to Telcordia GR-1209 and GR-1221
- Bend insensitive fiber G.657 A compliant
- Compact package for mounting into splice cassettes
- 1x2, to 1x64 standard configurations
- 2x2 to 2x32 for test access and redundancy
- Wideband performance
- Low insertion loss
- Low back reflection
- Low PDL (Polarization Dependent Loss)
- Low WDL (Wavelength Dependent Loss)
- Low TDL (Temperature Dependent Loss)
- High output uniformity and Stable optical performance
- According to Telcordia GR-1209 and GR-1221
- Bend insensitive fiber G.657 A compliant
- Compact package for mounting into splice cassettes
The Planar Lightwave Circuit (PLC) splitters provide uniform division of an optical signal from one or two input fiber ports to multiple output ports.
The splitters are design to meet the requirements for a wide range of fiber optic communications systems. The wideband performance makes them especially suitable for PON FTTx networks. Low loss under extreme environmental conditions ensures stable operation. Very compact packages with bend resistant fiber allow these modules to be installed into small compartments such as joint closures, Fiber Distribution Hubs (FDH) or fiber termination panels.
1xN and 2xN PLC splitters utilize silica on silica optical waveguide technology. PLC splitters enable thermally stable,compact packages with wideband performance.
The splitters are available in configurations with single fiber input from 1x2 to 1x64 as well as with dual fiber inputs 2x2 to 2x32. Input ports are of 250µm primary coated fiber. Output ports are of fiber ribbon design with 2, 4 or 8 fibers and in multiples 1-8 depending on the split ratio of the device.
The Splitter housing is made of metal.
Technical Information
| Temperature, Operation [°C] | -40 to +85 |
|---|---|
| Temperature, Storage [°C] | -40 to +85 |
| Fiber Type | G657A1 |
| Return Loss, min [dB] | 55 |
| Conformance | ITU-T G.657 A Telcordia GR-1209 Telcordia GR-1221 IEC 67153-031-3/-6 IEC 61754-4 IEC 61754-6 IEC 61754-20 RoHS |
| Technical Notes |
Operating Wavelength: 1260 ~ 1360, 1450 ~ 1650 nm
|
