Duct assemblies in three different versions with 2, 12 and 24 ducts respectively

MPB30209+

Microduct Assembly 5/3.5 mm Indoor – Standard Grade

FRD 5/3.5 mm 1-24 -way SG, StdE

For indoor installation
5/3.5 mm microducts
Halogen-free, flame-retardant, storard grade
1, 4, 7, 12 or 24 over-sheathed ducts
Low friction inner surface for maximum installation lengths

For indoor installation
5/3.5 mm microducts
Halogen-free, flame-retardant, storard grade
1, 4, 7, 12 or 24 over-sheathed ducts
Low friction inner surface for maximum installation lengths

This series of duct assemblies consist of ultra slim microducts made of halogen free, flame retardant material. The slim design enables installation virtually in any existing risers in Multi Dwelling Units. The assemblies consist of a number of Microducts with an inner low friction, antistatic surface that enables installation of air blown fibers.

The duct assemblies are available in several versions from 1 to 24 microducts . Each microduct has an outer/inner diameter of 5/3.5 mm. The outer sheath is made of halogen-free, flame-retardant polymer. One unsheathed single duct version for minimal cross section is available for installation in existing external protective microducts or sheaths.

Microduct Assembly 5/3.5 mm Indoor - Standard Grade - Technical Details

Microducts and sheath: Halogen-free, flame-retardant polyolefin

Technical Information

Color Code	S12
Temperature, Operation [°C]	-20 to +60
Temperature, Storage [°C]	-20 to +60
Temperature, Installation [°C]	-20 to +50
Conformance	Abrasion: IEC 60794-1-2-E2B(1) Kink: IEC 60794-1-2-E10, 20 x outer diameter Impact: IEC 60794-1-2-E4 Crush: IEC 60794-1-2-E3 Tensile: IEC 60794-1-2-E Bend: IEC 60794-1-2-E11A Torsion: IEC 60794-1-2-E Flexibility: IEC 60794-1-2-E8 Inner Clearance: IEC 60794-5-20, IEC 60794-5-10, Ann. D Flammability: IEC60332-1
Marking	Duct assemblies have markings showing the tube length. The individual microducts are numbered as well as color coded according to theStdE reference.
Installation Notes	Flammability according to IEC60332-1 refers to sheathed empty ducts and sheathed ducts installed with typical versions of Hexatronic blown fiber units. Unsheathed 1-duct is not flame retardant and shall be installed in flame retardant cable channel.