The product assortment on this website may differ from what is available where you are located. Do you want to visit the American website instead?

MPB30243+

Microduct Assembly 3/2 mm Indoor – Standard Grade

FRD 3/2 mm 1-24 -way SG

  • For indoor installation
  • Small or discrete design
  • Minimal cross section minimizes the need of large drilling holes
  • 3/2 mm microducts
  • Halogen-free, flame-retardant, storard grade
  • 1, 7, 12 or 24 over-sheathed ducts
  • Low friction inner surface for maximum installation lengths
  • For indoor installation
  • Small or discrete design
  • Minimal cross section minimizes the need of large drilling holes
  • 3/2 mm microducts
  • Halogen-free, flame-retardant, storard grade
  • 1, 7, 12 or 24 over-sheathed ducts
  • Low friction inner surface for maximum installation lengths

This series of duct assemblies consist of ultra slim microducts made of halogen free, flame retardant material. The slim design enables installation virtually in any existing risers in Multi Dwelling Units. The assemblies consist of a number of Microducts with an inner low friction, antistatic surface that enables installation of air blown fibers.

The duct assemblies are available in several versions from 1 to 24 microducts . Each microduct has an outer/inner diameter of 3/2.1 mm. The microducts and duct assemblies including the outer sheath are made of halogen-free, flame-retardant polymer. One unsheathed single duct version for minimal cross section is available for installation in existing external protective microducts or sheaths.

Microduct Assembly 3/2 mm Indoor - Standard Grade - Technical Details

Microducts and sheath: Halogen-free, flame-retardant polyolefin

Technical Information

Temperature, Operation [°C] -20 to +60
Temperature, Storage [°C] -20 to +60
Temperature, Installation [°C] -20 to +50
Reaction to Fire IEC60332-1
Conformance

Abrasion: IEC 60794-1-2-E2B(1)
Kink: IEC 60794-1-2-E10, 20 x outer diameter
Impact: IEC 60794-1-2-E4
Crush: IEC 60794-1-2-E3
Tensile: IEC 60794-1-2-E
Bend: IEC 60794-1-2-E11A
Torsion: IEC 60794-1-2-E
Flexibility: IEC 60794-1-2-E8
Inner Clearance: IEC 60794-5-20, IEC 60794-5-10, Ann. D
Flammability: IEC60332-1

Marking Duct assemblies have markings showing the tube length. The individual microducts are numbered.
Installation Notes Flammability according to IEC60332-1 refers to sheathed empty ducts and sheathed ducts installed with typical versions of Hexatronic blown fiber units.
Unsheathed 1-duct is not flame retardant and shall be installed in flame retardant cable channel.