Three different versions of tight protected duct assemblies with a number of microducts 5/3.5 mm

MPB30293+M

Microduct Assembly 5/3.5 mm

TND 5/3.5 mm 4-12 -way S12

For installation in existing ducts
Extra slim
4, 7 or 12 over-sheathed ducts
5/3.5 mm microducts
Low friction inner surface for maximum installation lengths

For installation in existing ducts
Extra slim
4, 7 or 12 over-sheathed ducts
5/3.5 mm microducts
Low friction inner surface for maximum installation lengths

The tight protected duct assemblies consist of a number of microducts with an inner low friction, antistatic surface that enables installation of air blown fiber.

These duct assemblies are designed with an extra slim PE sheath. The design makes the duct assemblies especially suitable for installation into narrow existing ducts (pipes) or pipes occupied with cables or other obstacles.

The duct assemblies are available in several versions with 4, 7 or 12 microducts. Each microduct has an outer/inner diameter of 5/3.5 mm. The microducts have a solid low-friction innner surface for best performance.

The assemblies comes in different colors for easy identification.

Microduct Assembly 5/3.5 mm - Technical Details

Microducts and outer sheath: HDPE

Technical Information

Color Code	S12
Temperature, Operation [°C]	-40 to +60
Temperature, Storage [°C]	-40 to +60
Temperature, Installation [°C]	-20 to +50
Conformance	Abrasion: IEC 60794-1-2-E2B(1) Kink: IEC 60794-1-2-E10, 20 x outer diameter Impact: IEC 60794-1-2-E4 Crush: IEC 60794-1-2-E3 Tensile: IEC 60794-1-2-E Bend: IEC 60794-1-2-E11A Torsion: IEC 60794-1-2-E Flexibility: IEC 60794-1-2-E8 Inner Clearance: IEC 60794-5-20, IEC 60794-5-10, Ann. D
Marking	The duct assemblies have markings showing the tube length. The individual microducts are identified by their color according to the S12 standard. The assemblies are available in various sheath colors for easy identification.