Microduct assemblies for installation into existing ducts

MPB30245+M

Microduct Assembly 5/3.5 mm

TPD 5/3.5 mm 1-26 -way S12

For installation in existing ducts
1, 2, 4, 7, 12, 19, 24 or 26 over-sheathed ducts
5/3.5 mm microducts
Low friction inner surface for maximum installation lengths

For installation in existing ducts
1, 2, 4, 7, 12, 19, 24 or 26 over-sheathed ducts
5/3.5 mm microducts
Low friction inner surface for maximum installation lengths

The tight protected duct assemblies consist of a number of microducts with an inner low friction, antistatic surface that enables installation of air blown fibers. The duct assemblies are bundled with a single HDPE sheath depending on configuration. The design makes the duct assemblies especially suitable for installation into narrow existing ducts (pipes) or pipes occupied with cables or other obstacles. The round structure enables easy splicing and sealing at joints and branch locations.

The duct assemblies are available in several versions with 1 to 26 microducts.

Each microduct has an outer/inner diameter of 5/3.5 mm. These are suitable for installation of air blown fibers.The center duct of 24 and 26-way assemblies is 10/8 resp. 12/10 mm and can be used for blowing in a micro cable.

Microducts and outer sheath: HDPE

Technical Information

Color Code	S12
Temperature, Operation [°C]	-40 to +60
Temperature, Storage [°C]	-40 to +60
Temperature, Installation [°C]	-20 to +50
Conformance	Abrasion: IEC 60794-1-2-E2B(1) Kink: IEC 60794-1-2-E10, 20 x outer diameter Impact: IEC 60794-1-2-E4 Crush: IEC 60794-1-2-E3 Tensile: IEC 60794-1-2-E Bend: IEC 60794-1-2-E11A Torsion: IEC 60794-1-2-E Flexibility: IEC 60794-1-2-E8 Inner Clearance: IEC 60794-5-20, IEC 60794-5-10, Ann. D
Marking	Duct assemblies have markings showing the tube length. The individual microducts are numbered and also identified by their color and position in the bundle according to the S12 standard. The assemblies are available in various sheath colors for easy identification.