The product assortment on this website may differ from what is available where you are located. Do you want to visit the American website instead?

Three thin walled microducts in red, yellow and orange

MPB30220+

Microduct 5/3.5 mm

TND 5/3.5 mm Primary Tube

  • For installation in existing ducts
  • Extra slim
  • 5/3.5 mm microducts
  • Low friction inner surface for maximum installation lengths
Talk to an expert

The slim, thin walled microducts has an inner low friction, antistatic surface that enables installation of air blown fibers.

The design makes the microducts especially suitable for installation into narrow existing ducts (pipes) or pipes occupied with cables or other obstacles.

5/3.5 mm microducts are optimized for installation of air blown fibers. The microducts have a solid low-friction innner surface for best performance.

The microducts comes in different colors for easy identification.

Microducts: HDPE

Technical Information

Temperature, Operation [°C] -40 to +60
Temperature, Storage [°C] -40 to +60
Temperature, Installation [°C] -20 to +50
Conformance

Abrasion: IEC 60794-1-2-E2B(1)
Kink: IEC 60794-1-2-E10, 20 x outer diameter
Impact: IEC 60794-1-2-E4
Crush: IEC 60794-1-2-E3
Tensile: IEC 60794-1-2-E
Bend: IEC 60794-1-2-E11A
Torsion: IEC 60794-1-2-E
Flexibility: IEC 60794-1-2-E8
Inner Clearance: IEC 60794-5-20, IEC 60794-5-10, Ann. D