Three different versions of indoor microduct assemblies in different colours

MPB30278+M

Microduct Assembly 7/3.5 mm

TWD 7/3.5 mm 1-24 -way S12

For direct burial
1, 2, 4, 7, 12, 19 or 24 bundled ducts
7/3.5 mm microducts
Low friction inner surface

The thick walled microduct bundles consist of a number of microducts with an inner low friction surface that enables installation of air-blown fiber units or nano cables. The thick inner wall of the microducts allow for installation directly into the ground without the need for additional protection.

The duct assemblies are available in several configurations from 1 to 24 microducts.

7/3.5 mm microducts are optimized for installation of air-blown fibers and nano cables. The microducts have a solid low-friction innner surface for best blowing performance.

Microduct Assembly 7/3.5 mm - Technical Details

Microducts and outer sheath: HDPE

Technical Information

Color Code	S12
Temperature, Operation [°C]	-40 to +60
Temperature, Storage [°C]	-40 to +60
Temperature, Installation [°C]	-20 to +50
Conformance	Abrasion: IEC 60794-1-2-E2B(1) Kink: IEC 60794-1-2-E10, 20 x outer diameter Impact: IEC 60794-1-2-E4 Crush: IEC 60794-1-2-E3 Tensile: IEC 60794-1-2-E Bend: IEC 60794-1-2-E11A Torsion: IEC 60794-1-2-E Flexibility: IEC 60794-1-2-E8 Inner Clearance: IEC 60794-5-20, IEC 60794-5-10, Ann. D
Marking	Duct assemblies have markings showing the type and tube length. The individual microducts are identified by their colors. 12 different colors are used according to the S12 standard. For duct assemblies with >12 ducts, the first 12 colored ducts are marked with “1” and the following ducts are marked with “2”. The assemblies are available in various sheath colors for easy identification.