- Products
- Cables
- Duct Cables
- Slotted Core Ribbon Cable – Dry
TOL4011023+A
Slotted Core Ribbon Cable – Dry
GAHSL 12-640 fibers G652D S12 - Dry
- Dry water-blocking tape prevents water penetration along the cable
- 12-640 fibers, G652.D
- High packing density of the fibers is provided by the ribbon technique
- Dielectric
- Suitable for installation by blowing, floating or pulling
- Dry water-blocking tape prevents water penetration along the cable
- 12-640 fibers, G652.D
- High packing density of the fibers is provided by the ribbon technique
- Dielectric
- Suitable for installation by blowing, floating or pulling
The cable is a dry 4- or 8-fiber ribbon cable for duct and direct buried installation. The slotted core design provides superior protection for the fiber ribbons. Each of the slots in the core contains 4- or 8-fiber ribbons. The 8-fiber ribbon can easily be split into two 4-fiber ribbons. Being completely dielectric, the cable can be installed in environments with electrical interference, e.g. near power lines. For direct burial installation, it is recommended that the cable is embedded in a minimum of 10 cm sand. The versatility of the cable and the inherent benefits of ribbon fiber technology, reduce the cost of installation.
The slotted core ribbon cables are designed with 4- or 8-fiber ribbons to gives high packing density of the fibers. The glass fiber reinforced strength member and the slotted core design provide superior protection for the fiber ribbons. Dry water-blocking tape prevents water penetration along the cable
- 4- or 8-fiber ribbon: Silica, acrylate
- Central strength member: Glass fiber reinforced plastic
- Slotted core: Polyethylene
- Water blocking: Swelling tape
- Sheath: Polyethylene
Technical Information
Product Color | Black Sheath |
---|---|
Color Code | S12 |
Temperature, Operation [°C] | -30 to +60 |
Temperature, Storage [°C] | -40 to + 70 |
Temperature, Installation [°C] | -15 to +50 |
Water Blocking | Longitudinal water blocking according to IEC 60794-1-2-F5B |
Fiber Type | G652D |
Attenuation @Wavelength [nm] | 1310/1550/1625 |
Average Attenuation [dB/km] | 0.36/0.20/0.25 |
Maximum Attenuation [dB/km] | 0.38/0.25/0.28 |
Conformance | Longitudinal water blocking according to IEC 60794-1-2-F5B. Mechanical and environmental tests in accordance with IEC 60794-1. Fiber parameters and tests according to the IEC series 60793-2 and 60793-1. |
Marking | Example of sheath marking, 1 time/meter: “HEXATRONIC XXX yymmddhh TOL4011020/384AH GAHSL-U-DHNV 384/B8 G652D xxxxx m" where yymmddhh = year, month, day and hour of manufacture, xxxxx=running meter marking. |
Installation Notes | If direct burial installation it is recommended that the cable is embedded in a minimum of 10 cm sand. If duct installation the cable should be installed at a temperature between -15 to +40°C. The cable shall not be stored in direct sunlight. The sun may heat up the cable over the permitted temperature limit. |
Ordering Information | Supplied lengths: 2, 4, 6 km (640-fibers cable max length is 5000 m) |