- Products
- Cables
- Drop Cables
- Unitube Drop Cable
TOL4016101+AH
Unitube Drop Cable
GPGL 2-12 fibers G657A1 S12
- Slim design for installation into microducts down to 3.5 mm inner diameter
- Installation by blowing or pulling
- Extra strong and durable, with integrated aramide strength member
- Smooth, low-friction sheath
- Excellent installation performance
- Halogen-free
- Slim design for installation into microducts down to 3.5 mm inner diameter
- Installation by blowing or pulling
- Extra strong and durable, with integrated aramide strength member
- Smooth, low-friction sheath
- Excellent installation performance
- Halogen-free
The unitube drop cable is a high performance Air Blown Cable that will minimize initial investment and at the same time provide a future proof network that is easy to expand, upgrade and maintain. The main application areas are for fiber access networks such as Fiber To The Home (FTTH) and Fiber To The Antenna (FTTA). The cable is intended for installation in microducts with an inner diameter from 3.5mm up to 12mm.
The unitube cable has a design that enables the cable to be blown or pulled through microducts. The cable is based on a unitube design surronded with aramide yarns as strength member. With the integrated strength member, the cable is ideal for both blowing and pulling. The strength member also adds increased stability and robustness to the cable. The cable is available with single mode bend resistant G657A1.
- Primary coated fiber: Silica, acrylate
- Loose tube
- Filler: Thixotropic gel
- Strength member: Aramide yarns
- Sheath: Polyethylene (black)
Technical Information
Product Color | Black Sheath |
---|---|
Color Code | S12 |
Temperature, Operation [°C] | -40 to +70 |
Temperature, Storage [°C] | -40 to +70 |
Temperature, Installation [°C] | -15 to +60 |
Fiber Type | G657A1 |
Attenuation @Wavelength [nm] | 1310/1550 |
Average Attenuation [dB/km] | 0.33/0.21 |
Maximum Attenuation [dB/km] | 0.38/0.25 |
Conformance | Fiber parameters and tests according to the IEC series 60793-2 and 60793-1. |
Marking | Example of sheath marking: HEXATRONIC A35 yymmddhh TOL4016101/8AH GPGL-U-DGV 8/T8 G657A1 S12 + meter marking |
Installation Notes | The cable is intended for installation in microducts with an inner diameter from 3.5mm up to 12mm. The cable should be installed at a temperature between -15 to +40°C. The cable shall not be stored in direct sunlight. The sun may heat up the cable over the permitted temperature limit. |