MPB32001+
Marker Peg
RF Detectable Marker Peg for underground installation
- RF marker for direct buried installation
- Standard frequency for telecom, power and general purpose use
- Detection range up to 2m
The marker peg is used to find cable or duct joints, splices, cable coils or other network elements that needs to be easily found.
The marker peg is installed vertically directly into the ground or attached to an optional holder to be attached to a joint or branch closure.
The marker peg is available in different frequency reflection spectrums for most utilitiues including telecom, power and general purpose applications.
The marker peg consist of a sharp plastic peg that is pushed or hammered into the ground. It can also be mounted on closures or in manholes. Inside the peg, a reflector coils is mounted that reflects RF signals. The peg is made from high density polymer, filled with gel. It has the same lifetime as the plant it is meant to help locate and is impervious to water.
An optional soft rubber marker peg holder with a 225 mm cable tie can be used to attach the peg towards a duct, cable or joint. The cable tie is suitable for diameters up to 50 mm.
All materials are RoHS and REACH compliant
Technical Information
| Temperature, Operation [°C] | -20 to +50 |
|---|---|
| Temperature, Storage [°C] | -40 to +60 |
| Temperature, Installation [°C] | -20 to +50 |
| Conformance | RoHS REACH |
| Technical Notes | Detection frequency: Orange (Telecom) - 101.4 kHz Red - 169.8kHz Purple (General Purpose) - 66,3kHz Other frequiencies on request. Range: Vertical 1.5-2 m; 45° -1 m |
| Ordering Information | Delivered in packs of 10 pcs. |
