- Products
- 5G and Wireless Infrastructure Solutions
- Transmission Line Products
- RET Connecting Cable
RPM254300+
RET Connecting Cable
RET Connecting Cables for outdoor and indoor use
- Robust, flexible and slim
- For outdoor or indoor use
- According to AISG specifications
- Connectors ACS C091 overmolded female
- According to IEC 601309
- Signal, 2xAWG24 (TP 100 Ω/1 MHz)
- Power, 2xAWG18 (4A)
- Sealed according to IP67
- Robust, flexible and slim
- For outdoor or indoor use
- According to AISG specifications
- Connectors ACS C091 overmolded female
- According to IEC 601309
- Signal, 2xAWG24 (TP 100 Ω/1 MHz)
- Power, 2xAWG18 (4A)
- Sealed according to IP67
RET (Remote Electrical Tilt) makes it possible to adjust the angle of an antenna remotely. In mobile radio networks, temporary antenna alignment is used for optimizing the network geographically on specific hotspots where higher capaicty is temorarily required.
These cables offer a flexible solution to connect the RRU or MCU to the antenna, allowing for a flexible movement.
The cables are provided with 8 pin female to male connector according to IEC 60130-9.
Flame retardant design according to UL 1581-1061, UL 1685 and IEC603321-3-24.
Cable and connectors are sealed according to IP67 (when mated).
Cable ø 6.4 mm
Connector PIN-layout:
- Not connected
- Not connected
- RS485 B
- Not connected
- RS485 A
- +29 V DC (+24 V DC nominal)
- DC Return
- Not connected
Wire LIY 1x0.86/1.8 1:
- Stranded bare copper wire (18AWG), ø 1.2 mm (0.047 in)
- Insulation (PVC), ø 1.8 mm (0.071 in)
Pair LI9Y 2x0.22/1.1:
- Stranded bare copper wire (24AWG), ø 0.6 mm (0.024 in)
- Insulation (PP), ø 1.1 mm (0.043 in)
- 2 wires WH and BN twisted to a pair
Core:
- pair WH/BN
- 2 wires BU-BK
- Fillers
- Plastic tape, overlapped
- Aluminium foil, overlapped, longitudinally
- Shield braiding of thinned copper wires (approx 50% coverage)
Jacket:
- PVC, black, ø 6.4±0.2 mm (0.252±0.008 in)
Technical Information
Product Color | Black |
---|---|
Temperature, Operation [°C] | -40 to +80 |
Temperature, Storage [°C] | -40 to +80 |
Temperature, Installation [°C] | -40 to +80 |
IP Rating | IP67 |
Reaction to Fire | UL1581-1061, UL1685 (vert. tray) CM, IEC603321-3-24 (Cat. C), UL2556 (Sec. 9.4), old UL1581 (sec. 1080) VW-1 |
Technical Notes | Electrical data at 20°C
Other characteristics:
|
Installation Notes | Mating torque 0.5-1 Nm. The connector should be tightened by hand or with special tool (Amphenol FH 0400 091). |