- Products
- Microducts and Microduct Assemblies
- Lashed Aerial Microducts (North America)
- Figure 8 Aerial 5/3.5mm Drop
MPB30224/1BF
Figure 8 Aerial 5/3.5mm Drop
TPD 5/3.5 mm TIA598
- Aerial, dielectric, self supporting design
- 5/3.5mm microduct system
- Low friction inner surface for maximum installation lengths
- Excellent UV resistance
- Slim, lightweight design with low visual impact
- Aerial, dielectric, self supporting design
- 5/3.5mm microduct system
- Low friction inner surface for maximum installation lengths
- Excellent UV resistance
- Slim, lightweight design with low visual impact
The tight protected duct assemblies consist of a number of microducts with an inner low friction surface that enables air blown installation of air blown fibers or micro cables.
The duct assemblies are dielectric and self supported. This makes the ducts suitable for aerial applications along power lines.
The duct assembly is available with 5/3.5mm microduct (OD/ID) for the installation of customer drop installations with air blown fiber and distribution micro cables into the same infrastructure.
Depending on type, the assemblies are of All-Dielectric Self-Supporting (ADSS) or Figure-8 design. The available configurations are chosen for perfect match with Hexatronic aerial blown fiber system for fiber access networks.
Microducts: HDPE
Strain relief: FRP or aramide yarn
Technical Information
Color Code | TIA598 |
---|---|
Conformance |
Abrasion: IEC 60794-1-2-E2B(1)
|
Marking | Duct assemblies have markings showing the tube length. The individual microducts are identified by their color and position in the bundle. |