- Products
- Microducts and Microduct Assemblies
- Direct Buried Thick Walled Ducts
- Microduct Assembly 14/10 mm
MPB30283+NZ
Microduct Assembly 14/10 mm
TWD 14/10 mm 4-7 way, KNZ
- For direct burial
- 4 or 7 bundled ducts
- 14/10 mm microducts
- Low friction inner surface
- Longitudinal grooves for maximum installation lengths
Trace wire for the duct assembly traceability
- For direct burial
- 4 or 7 bundled ducts
- 14/10 mm microducts
- Low friction inner surface
- Longitudinal grooves for maximum installation lengths
Trace wire for the duct assembly traceability
The thick walled microduct are designed with an inner low friction surface that enables installation of micro cables or nano cables. The thick wall of the microducts allow for installation directly into the ground without the need for additional protection.
The duct assemblies are available in configurations of 4 and 7 microducts.
14/10 mm microducts are optimized for the installation of micro cables and nano cables. The microducts have a low-friction inner surface with longitudinal grooves for best blowing performance.
Microducts and outer sheath: HDPE
Technical Information
Color Code | KNZ |
---|---|
Temperature, Operation [°C] | -40 to +60 |
Temperature, Storage [°C] | -40 to +60 |
Temperature, Installation [°C] | -20 to +50 |
Conformance |
Abrasion: IEC 60794-1-2-E2B(1)
|
Marking | Duct assemblies have markings showing the tube length. The individual microducts are indentified by their colours according to the New Zealand standard. The assemblies come with a red or green outer sheath or with a customised outer sheath colour by particular order. |