- Products
- Microducts and Microduct Assemblies
- Duct Install Microducts
- Microduct Assembly 10/8 mm
MPB30260+AB
Microduct Assembly 10/8 mm
TPD 10/8 mm 2-12 -way DIN0888
- For installation in existing ducts
- Extra slim
- 2, 4 or 12 over-sheathed ducts
- 10/8 mm microducts
- Low friction inner surface for maximum installation lengths
- For installation in existing ducts
- Extra slim
- 2, 4 or 12 over-sheathed ducts
- 10/8 mm microducts
- Low friction inner surface for maximum installation lengths
The tight protected duct assemblies consist of a number of microducts with an inner low friction surface that enables installation of micro cables or nano cables.
These duct assemblies are designed with an extra slim PE sheath. The design makes the duct assemblies especially suitable for installation into narrow existing ducts (pipes) or pipes occupied with cables or other obstacles.
The duct assemblies are available in several versions with 2, 4 or 12 microducts. 10/8 mm microducts are optimized for installation micro cables or nano cables. The microducts have a low-friction innner surface with longitudinal grooves for best blowing performance.
The assemblies comes in different colors for easy identification.
Microducts and outer sheath: HDPE
Technical Information
Color Code | DIN0888 |
---|---|
Temperature, Operation [°C] | -40 to +60 |
Temperature, Storage [°C] | -40 to +60 |
Temperature, Installation [°C] | -20 to +50 |
Conformance |
Abrasion: IEC 60794-1-2-E2B(1)
|
Marking | The duct assemblies have markings showing the tube length. The individual microducts are identified by their color according to the DIN0888 standard. The assemblies are available in various sheath colors for easy identification. |