- Products
- Microducts and Microduct Assemblies
- Direct Buried Thick Walled Ducts
- Microduct Assembly 12/8 mm
MPB30266+AB
Microduct Assembly 12/8 mm
TWD 12/8 mm 2-12 -way DIN0888
- For direct burial
- 2, 4, 6, 7 or 12 bundled ducts
- 12/8 mm microducts
- Low friction inner surface
- Longitudinal grooves for maximum installation lengths
The thick walled microduct are designed with an inner low friction surface that enables installation of micro cables or nano cables. The thick inner wall of the microducts allow for installation directly into the ground without the need for additional protection.
The duct assemblies are available in several configurations from 2 to 12 microducts.
12/8 mm microducts are optimized for installation of nano cables and air-blown fibers. The microducts have a solid low-friction innner surface The microducts have a low-friction innner surface with longitudinal grooves for best blowing performance.
Microducts: HDPE
Technical Information
Color Code | DIN0888 |
---|---|
Temperature, Operation [°C] | -40 to +60 |
Temperature, Storage [°C] | -40 to +60 |
Temperature, Installation [°C] | -20 to +50 |
Conformance |
Abrasion: IEC 60794-1-2-E2B(1)
|
Marking | Microducts have markings showing the type and tube length. The individual microducts are identified by their colors. 12 different colors are used according to the DIN0888 standard. The assemblies are available in various sheath colors for easy identification. |
Technical Notes | (*) The technical information provided here is normally verified by thorough testing according to standardized test procedures. However, some configurations that has not yet been in production are shown with calculated values. This information may be updated after final testing has been performed. |