- Products
- 5G and Wireless Infrastructure Solutions
- Transmission Line Products
- RET Connecting Cable
RPM254300+
RET Connecting Cable
RET Connecting Cables for outdoor and indoor use
- Robust, flexible and slim
- For outdoor or indoor use
- According to AISG specifications
- Connectors ACS C091 overmolded female
- According to IEC 601309
- Signal, 2xAWG24 (TP 100 Ω/1 MHz)
- Power, 2xAWG18 (4A)
- Sealed according to IP67
- Robust, flexible and slim
- For outdoor or indoor use
- According to AISG specifications
- Connectors ACS C091 overmolded female
- According to IEC 601309
- Signal, 2xAWG24 (TP 100 Ω/1 MHz)
- Power, 2xAWG18 (4A)
- Sealed according to IP67
The cables are provided with 8 pin female to male connector according to IEC 60130-9.
Flame retardant design according to UL 1581-1061, UL 1685 and IEC603321-3-24.
Cable and connectors are sealed according to IP67 (when mated).
Cable ø 6.4 mm
Connector PIN-layout:
- Not connected
- Not connected
- RS485 B
- Not connected
- RS485 A
- +29 V DC (+24 V DC nominal)
- DC Return
- Not connected
Wire LIY 1x0.86/1.8 1:
- Stranded bare copper wire (18AWG), ø 1.2 mm (0.047 in)
- Insulation (PVC), ø 1.8 mm (0.071 in)
Pair LI9Y 2x0.22/1.1:
- Stranded bare copper wire (24AWG), ø 0.6 mm (0.024 in)
- Insulation (PP), ø 1.1 mm (0.043 in)
- 2 wires WH and BN twisted to a pair
Core:
- pair WH/BN
- 2 wires BU-BK
- Fillers
- Plastic tape, overlapped
- Aluminium foil, overlapped, longitudinally
- Shield braiding of thinned copper wires (approx 50% coverage)
Jacket:
- PVC, black, ø 6.4±0.2 mm (0.252±0.008 in)
Technical Information
Tuotteen väri | Black |
---|---|
Lämpötila, käyttö [°C] | -40 to +80 |
Lämpötila, varastointi [°C] | -40 to +80 |
Lämpötila, asennus [°C] | -40 to +80 |
IP-luokitus | IP67 |
Palo-ominaisuudet | UL1581-1061, UL1685 (vert. tray) CM, IEC603321-3-24 (Cat. C), UL2556 (Sec. 9.4), old UL1581 (sec. 1080) VW-1 |
Tekniset tiedot | Electrical data at 20°C
Other characteristics:
|
Asennustiedot | Mating torque 0.5-1 Nm. The connector should be tightened by hand or with special tool (Amphenol FH 0400 091). |