- Products
- Accessories for Cables and Ducts
- Accessories for Aerial Installation
- FTTH Drop Clamp 5/35
FCAX-FIX-DRP-TL5-35
FTTH Drop Clamp 5/35
Enables single or double anchoring of drop cables
- Cost-effective, single-piece design
- Simple and fast installation requiring no tools
- Efficient cable grip by conical wedging
- Manual adjustment of the lowest point of the cable by blocking the wedge on the remote position
- Mounting on all pole line hardware with open or closed eye and min. Ø 10mm
- Cost-effective, single-piece design
- Simple and fast installation requiring no tools
- Efficient cable grip by conical wedging
- Manual adjustment of the lowest point of the cable by blocking the wedge on the remote position
- Mounting on all pole line hardware with open or closed eye and min. Ø 10mm
- On end poles and every 5 poles (in addition to suspension clamps on intermediate poles) or on every pole in double anchoring configurations
- When the line is at an angle greater than 25° (instead of a suspension device) in order to preserve the cable throughout time
- If road crossing (mandatory cable stop on each pole on both sides of the road)
- In case of unbalanced adjacent spans (a 40m span followed by a range of 30m span, for example)
- In rugged terrain (downhill line on the mountainside, for instance)
5/35 FTTH R drop wedge clamp enables the dead-ending of round optical cables deployed on distribution networks where spans do not exceed 70m.
This one-piece thermoplastic clamp consists of a closed conical-shaped body, a round wedge with an integrated lanyard and an opening bail.
Thanks to its ruggedly engineered bail, the 5/35 FTTH R clamp is to be secured directly on pole fittings, with open or closed eye, or on pole hardware with Ø 10mm minimum.
5/35 FTTH R drop clamp is designed for round fibre optic cables with Ø 2.5 – 5 mm.
Technical Information
Technical Notes |
|
---|