- Products
- Microducts and Microduct Assemblies
- Duct Install Microducts
- Microduct Assembly 12/10 + 5/3.5 mm
MPB30325+B
Microduct Assembly 12/10 + 5/3.5 mm
TPD 12/10 + 5/3.5 mm 9-27 way TIA598 Termite Protected
- For installation in existing ducts
- 9, 11, 15 or 27 over-sheathed ducts
- 12/10 mm and 5/3.5 mm microducts
- Low friction inner surface for maximum installation lengths
- Longitudinal grooves for maximum installation lengths in 12/10 ducts
- Excellent environmental properties
- Nylon sheathed microducts for termite protection
- For installation in existing ducts
- 9, 11, 15 or 27 over-sheathed ducts
- 12/10 mm and 5/3.5 mm microducts
- Low friction inner surface for maximum installation lengths
- Longitudinal grooves for maximum installation lengths in 12/10 ducts
- Excellent environmental properties
- Nylon sheathed microducts for termite protection
The tight protected duct assemblies consist of a number of microducts with an inner low friction, antistatic surface that enables installation of air blown fibers. The duct assemblies are bundled with a single HDPE or PP sheath depending on configuration. The design makes the duct assemblies especially suitable for installation into narrow existing ducts, conduit or pipes occupied with cables or other obstacles. The nylon layer applied to each microduct makes these assemblies suited to termite prone areas even where the outer jacket is removed for branching or routing. The round structure enables easy splicing and sealing at joints and branch locations.
The duct assemblies are available in several versions with 9 to 27 microducts. Each microduct has an outer/inner diameter of 12/10 mm or 5/3.5 mm. Both the 12/10 mm and 5/3.5 mm microducts are suitable for installation of air blown fibers or nano cables and the 12/10 mm microduct can also be used for blowing micro cables.
Technical Information
Product Color | Black |
---|---|
Color Code | TIA598 |
Temperature, Operation [°C] | -40 to +60 |
Temperature, Storage [°C] | -40 to +60 |
Temperature, Installation [°C] | -20 to +50 |
Conformance |
Abrasion: IEC 60794-1-2-E2B(1)
|
Marking | Duct assemblies have markings showing the tube length. The individual microducts are indentified by their colours according to the TIA standard. Bundles of more than 12 ducts are also identified by numbers 1, 2 and 3 as required. The assemblies come with a black outer sheath, or with a customised outer sheath colour by special order. |