- Products
- Microducts and Microduct Assemblies
- Direct Buried Thick Walled Ducts
- Microduct Assembly 20/16 mm
5/MPB30257+AU
Microduct Assembly 20/16 mm
TWD 20/16 mm 2-4 way TIA598
- For direct burial or installation into existing conduits
- 2 or 4 bundled ducts
- 20/16 mm microducts
- Low friction inner surface
- Longitudinal grooves for maximum installation lengths
- For direct burial or installation into existing conduits
- 2 or 4 bundled ducts
- 20/16 mm microducts
- Low friction inner surface
- Longitudinal grooves for maximum installation lengths
The thick walled microduct are designed with an inner low friction surface that enables blowing of micro cables. These microducts are also suitable for pushing or hauling cables. The thick wall of the microducts allow for installation directly into the ground or into existing ducts without the need for additional protection. Where optioned, the integrated tracer wire saves time and installation cost since an additional wire for tracing is not required.
The duct assemblies are available with 2 or 4 microducts.
20/16 mm microducts are optimized for installation of micro cables. The microducts have a low-friction innner surface with longitudinal grooves for best blowing performance.
Technical Information
Product Color | White |
---|---|
Color Code | TIA598 |
Temperature, Operation [°C] | -40 to +60 |
Temperature, Storage [°C] | -40 to +60 |
Temperature, Installation [°C] | -20 to +50 |
Conformance |
Abrasion: IEC 60794-1-2-E2B(1)
|
Marking | Duct assemblies have markings showing the tube length. The individual microducts are indentified by their colours according to the TIA standard. The assemblies come with a white outer sheath, or with a customised outer sheath colour by special order. |