- Products
- Microducts and Microduct Assemblies
- Direct Buried Thick Walled Ducts
- Microduct Assembly 14/10 mm
5/MPB30324+AU
Microduct Assembly 14/10 mm
TWD 14/10 mm 2-7 way TIA598 Termite Protected
- For direct burial
- 2, 4 or 7 bundled ducts
- 14/10 mm microducts
- Low friction inner surface
- Longitudinal grooves for maximum installation lengths
- Termite protected nylon sheathed microducts
- Optional integrated tracer wire
- For direct burial
- 2, 4 or 7 bundled ducts
- 14/10 mm microducts
- Low friction inner surface
- Longitudinal grooves for maximum installation lengths
- Termite protected nylon sheathed microducts
- Optional integrated tracer wire
The thick walled microduct are designed with an inner low friction surface that enables installation of micro cables or nano cables. The thick wall of the microducts allow for installation directly into the ground without the need for additional protection. The nylon layer applied to each microduct makes these assemblies suited to termite prone areas even in pits and at branches where the outer jacket is removed. Where optioned, the integrated tracer wire saves time and installation cost since an additional wire for tracing is not required.
The duct assemblies are available in several configurations from 2 to 7 microducts.
14/10 mm microducts are optimized for installation of micro cables and nano cables. The microducts have a low-friction innner surface with longitudinal grooves for best blowing performance.
Technical Information
Product Color | White |
---|---|
Color Code | TIA598 |
Temperature, Operation [°C] | -40 to +60 |
Temperature, Storage [°C] | -40 to +60 |
Temperature, Installation [°C] | -20 to +50 |
Conformance |
Abrasion: IEC 60794-1-2-E2B(1)
|
Marking | Duct assemblies have markings showing the tube length. The individual microducts are indentified by their colours according to the TIA standard. The assemblies come with a white outer sheath, or with a customised outer sheath colour by special order. |