The product assortment on this website may differ from what is available where you are located. Do you want to visit the American website instead?

FTACS01-B309+

Ultra Discreet Drop Cable

Compact 900um terminated drop cables for discreet cable installations

  • Pre-terminated SCA connectors
  • Clip on connector for minimised wall penetrations
  • Small diameter cable
  • Ultra Bend Resistant
  • Flexible
  • LSZH Material
  • IEC 60793
  • ITU G.650, G657.B3
  • Pre-terminated SCA connectors
  • Clip on connector for minimised wall penetrations
  • Small diameter cable
  • Ultra Bend Resistant
  • Flexible
  • LSZH Material
  • IEC 60793
  • ITU G.650, G657.B3
Talk to an expert

Pre-terminated 900um Discreet drop cables are perfect for installing in Subscriber premises where it is desirable to keep cable visibility to a minimum. These drop cables are perfectly suited for use with Hexatronic's discreet MDU cabling solution. These drop cable assemblies can also be used in other applications requiring minimal visual impact.

Compact 900um tight buffered design with ultra bend insensitive G657B3 fiber. White jacket for minimal visual impact. Pre-terminated SC/APC connectors both ends for plug and play subscriber activation. The provided clip on connector with pulling eye cover minimizes wall penetration size and aids installation.

Ultra Discreet Drop Cable - Technical Details
  1. Primary coated fiber: Silica, acrylate
  2. Tight buffer: LSZH

Technical Information

Product Color White
Temperature, Operation [°C] -30 to +70
Temperature, Storage [°C] -40 to +70
Temperature, Installation [°C] -10 to +50
Reaction to Fire Cca -s1a, d0, -a1
Fiber Type G657B3
Attenuation @Wavelength [nm] 1310/1550/1625
Maximum Attenuation [dB/km] 0.35/0.21/0.25
Insertion Loss, max [dB] 0.5
Return Loss, min [dB] 60
Conformance

IEC 61754 series: Fiber connector interfaces
IEC 61755 series: Fiber optic connector optical interfaces
IEC 61753 series: Fiber optical interconnecting devices and passive components performance standard
IEC 61300 series: Fiber optic interconnecting devices and passive components – basic test and measurement
ITU G657B3: Characteristics of SM optical fiber
Technical Notes Insertion loss measured according to IEC61300-3-4
Return loss measured according to IEC61300-3-6
Installation Notes

To assemble the pullable SCA connector:

  • Remove the black cover by twisting and pulling free, holding the connector by the larger end of the boot.

(Never pull or push by the cable as this can damage or break the cable)

  • Remove the dust cap, taking care not to contaminate the end face.
  • Attach the white inner housing by aligning the opening on the top bevelled side with the two round indentations in the metal and pressing it firmly over the ferrule with the split open end facing towards the cable.
  • Reattach the dust cap and slide the green outer housing over the inner housing, ensuring to align the bevelled corners with the bevelled cutout on the connector.
  • Remove dust cap and insert into the through adaptor.