- Products
- Microducts and Microduct Assemblies
- Indoor Microducts
- Microduct Assembly 5/3.5 mm Indoor/Outdoor
MPB30252+
Microduct Assembly 5/3.5 mm Indoor/Outdoor
FRD 5/3.5 mm 1 -way HG ID/OD
- Sheathed duct for indoor or outdoor use
- Outer sheath UV resistant for outdoor facade installation
- Inner microduct, flame retardant for installations indoor
- Halogen-free, flame-retardant
- Low friction inner surface for maximum installation lengths
- Excellent environmental properties
- Sheathed duct for indoor or outdoor use
- Outer sheath UV resistant for outdoor facade installation
- Inner microduct, flame retardant for installations indoor
- Halogen-free, flame-retardant
- Low friction inner surface for maximum installation lengths
- Excellent environmental properties
The indoor/outdoor tight protected microduct consist of a halogen free, flame retardant inner duct with a removable, UV resistant outer sheat. This design makes it possible to install the duct outdoors on facades. Sections of the duct can aslo be installed indoors by simply removing the outer sheath, exposing the flame retardant inner duct. The microduct can be mounted onto facades with cable clamps (7mm).
The microducts are made of halogen-free, flame-retardant polymer. The microducts are white with a colored outer sheath that blends in with different types of facades. Color options for the sheath are white, grey and brown. The inner flame retardant microduct has an outer/inner diameter of 5/3.5 mm and is colored white.
Microducts: Halogen-free, flame-retardant polyolefin
Sheath: HDPE
Technical Information
Temperature, Operation [°C] | -40 to +60 |
---|---|
Temperature, Storage [°C] | -40 to +60 |
Temperature, Installation [°C] | -20 to +50 |
Conformance |
Abrasion: IEC 60794-1-2-E2B(1)
|
Installation Notes | Note that the sheath must be removed for the section of the duct that is installed indoors. |