- Products
- Accessories for Cables and Ducts
- Wall entry and Sealing
- Wall Entry Kit for 7 and 10mm Ducts
NEG205101+
Wall Entry Kit for 7 and 10mm Ducts
Wall Entry Kit for 7 and 10mm Ducts
- Complete kit for gas and watertight sealing of FTTH home entries with microducts and cables
- Complies to DIN18322 and DIN18533
- Quick installation in minutes
- No special tools required and no drill holes to attach the exterior sealing cap
- Strong and durable seal with an expanding resin gives a high mechanical strength and high resistance to ground movement, shocks and vibrations
- Also suitable for angled holes
- Complete kit for gas and watertight sealing of FTTH home entries with microducts and cables
- Complies to DIN18322 and DIN18533
- Quick installation in minutes
- No special tools required and no drill holes to attach the exterior sealing cap
- Strong and durable seal with an expanding resin gives a high mechanical strength and high resistance to ground movement, shocks and vibrations
- Also suitable for angled holes
The kit is used to restore a gas-tight and watertight seal of the house in accordance with the relevant standards. The kit described here consists of all products and materials required for an underground house entry. The kit can be used in both straight and diagonal installations according to the following illustrations. For above ground access, the entry plate from the underground solution is replaced by another cover.
The kit contains a circular outdoor entry plate, an anchoring device to lock the entry plate to the wall, expanding resin to
create the seal and an indoor 90° entry cover. The indoor sealant (MD+) is a consumable sold separately.
The kit is suitable for sealing holes in the most common wall types according to DIN 18533 and walls made from WU-Concrete, load class 1 and 2 (watertightpressure 2.0 bar).
Complies with DIN 18322 underground cable laying works: cable and conduit entries into buildings are to be made watertight and gastight.
Technical Information
Product Color | white, similar to RAL 9010 |
---|---|
Conformance | Suitable for sealing boreholes in the most common types of wall with seals according to DIN 18533 as well as walls made of WU concrete with stress class 1 and 2 (gas- and water-tight, test pressure 2 bar). Complies with DIN 18322 cable line civil engineering work |
Technical Notes |
|
Installation Notes | Recommendation bore: up to 7mm tube/ cable = 16-20mm up to 12mm tube/ cable = 22-25mm Resin properties:
Expansion starts: after 20 s
|
Ordering Information | For completely above ground installation, use NEG205102+. One set contains 25 or 6 entries and one cartridge each of Filoform MD+ sealing paste. |